HOW TO SPECIFY MICROLIN™ AND POSILIGN™ ASSEMBLIES

The type and size of cable as well as the selection of the proper end fittings will be determined by your application. Once a design is selected, specify the length of the assembly, pull-off requirement and working load. Working loads should not exceed 20% of nominal cable breaking strength. When specifying cable assembly length, the best practice would be to use the distance between measuring points as indicated.

Bergen Cable Technology, LLC
343 Kaplan Drive, Fairfield, NJ 07004 USA
Telephone: 973-276-9596 * Fax 973-276-9566 * Email: sales@bergencable.com
© 2005 Bergen Cable Technology, LLC. All rights reserved.