Push-Pull Control Cable - Core Fittings

PUSH-PULL CONTROL CABLES

Intro | Conduit Selection and Fittings | Conduit Cores | Core Fittings | How to Specify

CORE FITTINGS

Bergen core fittings are cost effective designs for large-volume production requirements. These fittings are compatible with Bergen's standard cores and may be subject to minimum order requirements. Economical die-cast processes are also available. Contact Bergen for additional design and application assistance. Use the Core Fittings Selection Chart to match these fittings with the proper cable diameter.

Die Cast Puck: 538-02-011		Slotted Eye: 231-02-137
Material: Zamak #3 Zinc		Material: 1008 – 1010 Carbon Steel
		Finish: None
Detailed Image		Detailed Image

Die Cast Ball: 308-15-147		Slotted Eye: 231-02-138
Material: Zamak #3 Zinc		Material: 1008 – 1010 Carbon Steel
		Finish: None
Detailed Image		Detailed Image

Die Cast Ball: 308-15-148		Eye: 231-02-128
Material: Zamak #3 Zinc		Material: 1008 – 1010 Carbon Steel
		Finish: None
Detailed Image		Detailed Image

Plug: 312-15-447		“Z” Fitting: 538-00-023
Material: 1215 / 12L14		Material: 1215
Finish: Zinc Plate w/Clear Dichromate		Finish: Zinc Plate w/Yellow Dichromate
Detailed Image		Detailed Image

Plug: 312-02-457		Threaded End: BW440
Material: 1215 / 12L14		Material: 1215 / 12L14, 300 Series CRES
Finish: Zinc Plate w/Yellow Dichromate		Finish: Zinc Plate w/Clear Dichromate, Passivate
Detailed Image		Detailed Image

CORE FITTINGS SELECTION CHART

Bergen's standard core fitting are compatible with either 1/16 inch or 3/64 inch nominal diameter cable (core). Additional fitting designs are available upon request. Contact Bergen for additional design and application assistance.

Part Number	Min. Pull Off Load (lbs)	Cable Dia.
308-15-147	150	3/64
308-02-148	100	1/16
312-15-447	150	3/64
312-02-457	100	1/16
538-02-011	100	1/16
538-00-023	100	1/16
231-02-128	100	1/16
231-02-137	100	1/16
231-02-138	100	1/16
440-1 1/2P	150	3/64
440-2P	100	1/16